Welcome

 

Welcome to the home of RSiAJP and RSiAJP-Lite, iOS applications for monitoring and diagnosing issues on the MBE ECU found in S6 and V8 AJP engined TVR cars such as the Cerbera, Tamora, Tuscan, T350c, T350T and Sagaris.

The applications once installed on an iPhone or iPad connect wirelessly to the car's ECU via a supported Bluetooth Low Energy (also known as BLE) serial adapter.

Once connected to the ECU, you will be able to monitor all of the ECU parameters in real time, as well as perform operations on the ECU such as resetting adaptives and others. Moreover, the applications use the iPhone or iPad's GPS to provide you with a speed readout along with GPS location and heading.

RSiAJP-Lite is completely free (except that a serial-bluetooth adapter is required in order to receive data from the ECU). It is limited in functionality, however it enables you to check connectivity to the ECU via the bluetooth adapter, to see the engine's RPM and your travelling speed prior to purchasing the full version.

All screens are enabled, only the first shows real time data, all others show simulated data. This enables you to get an idea of the full application's features.

Note: The application may be used without an adapter by enabling the simulation mode in settings, in this case all screens including the first will show simulated data without the need for a bluetooth connection.

RSiAJP is the full application.

Features

  • Bluetooth
    • Automatic connection/reconnection (both)
    • Manual disconnection/reconnection (both)
  • Status
    • Bluetooth connection status (both)
    • ECU connection status (both)
    • Simulation mode (both - note screens 2 onwards are simulated by default in Lite version)
  • Start/Stop data logging (both - Lite only logs RPM, Speed and GPS data)
  • Export via email (both)
    • Data Log
    • Alert Log
    • Min / Max values
    • Maximum speed only displayed and logged if user chooses
  • Display values (Lite only shows RPM, Speed and GPS data, the rest is simulated)
    • RPM
    • GPS Speed (in MPH or KPH)
    • Coolant temperature (Water temperature)
    • Battery voltage
    • Throttle pots
    • Lambda
    • Adaptives
    • Air temp
    • Oil Pressure (if available from ECU)
    • Barometric pressure
    • Ignition advance
    • Injector open time and calculated duty cycle
    • Selected Gear (calculated from transmission / tyre sizes input in settings, RPM and GPS Speed)
    • Live barometric sensor fault
    • Live battery fault
    • Live water temperature sensor fault
    • Live air temperature sensor fault
    • Live throttle potentiometer sensor faults (1 and 2)
    • Live lambda faults (1 and 2)
    • Live crank wiring switched fault
    • Live crank sensor signal fault
    • Live AFR fault (A and B)
    • Live fan status (1 and 2)
    • Live fuel pump status
    • Acceleration in G
    • Lateral G
    • Current time
    • Latitude
    • Longitude
    • Heading
    • Altitude
    • GPS Status
    • Vertical GPS accuracy
    • Horizontal GPS accuracy
    • Logged lambda faults (1 and 2)
    • Logged battery fault
    • Logged air temperature sensor fault
    • Logged throttle potentiometer fault (1 and 2)
    • Logged water temperature sensor fault
    • Logged barometric sensor fault
    • Lambda control
    • Lambda 1 control
    • Lambda 2 control
    • Fuel Cut control
    • Water control
    • dThrottle control
    • dSpeed control
    • WarmUp timer control
  • Normal / Warn / Alert ranges on gauges (both)
    • Text values colour changes based on normal/warn/alert state
  • Voice alert on normal/warn/alert on all data values and faults (individually selectable) (RPM and speed only with lite version)
    • Repeat voice alert or alert only once
    • Threshold percentage on changes from alert to warn and warn to normal to avoid repeated alerts around threshold values
  • Sound alerts on warn and alert on all data values and faults (individually selectable) (RPM and speed only with lite version)
    • Select from one of three sounds
    • Repeat sound off/10s/20s/30s while in warn or alert condition
  • Voice and sound alerts continue while application is running in the background (RPM and speed only with lite version)
  • Choose to log alerts or not for each of the data values (both)
  • Min and Max values on gauges (both)
  • ECU Resets (not lite version)
    • Reset adaptive maps
    • Reset service interval
    • Reset faults
    • Reset Throttle (S6 only)
  • Record live ECU and GPS data (Lite RPM and GPS data only)
  • Settings (both)
    • Enable metric speed indication
    • Enable remember last screen
    • Enable swipe or tap to change screen
    • Enable display oil pressure
    • Choose or override auto-detection of engine type (V8 or S6)
    • Enable ECU simulation
    • Choose voice language (French or English)
      • Choose voice from available list on device for language
    • Setup warning and alert thresholds, voice alerts, sound alerts
    • Setup application colours (gauges, text, needle, bezel, bezel rim, app background)
    • Bluetooth adapter type selection
      • Arduino behaviour selection
    • Default email address to send logs to
    • Connected bluetooth device information
    • Download user manual
    • About the application

For more details on each application's functionality, please consult the user guide.

RSiAJP Lite in the App Store: RSiAJP Lite

RSiAJP in the App Store: RSiAJP

RSiAJP on Facebook: RSiAJP